
89000046-014
KSN 780/8XX/900 AeroNav AML STC Installation Manual for Helicopters
Rev 0
Page 6-15
© Honeywell International Inc. Do not copy without express permission of Honeywell.
6.1.12.5 Standby Com Monitor
Description
Connector Pin
Signal Type
Com Monitor Audio HI
P1006
7
Output
Com Monitor Audio LO
P1006
34
Output
Table 59 Standby Communication Output
This optional signal use can be used with audio panels that have a means of selecting the #1 standby
com audio (e.g. Avidyne AMX240).
6.1.13 VOR/ILS Indicator Electrical Characteristics
Note: This section is N/A for AeroNav 880/780.
6.1.13.1 Superflag
Description
Connector Pin
Signal Type
VOR/LOC Superflag
P1006
15
Output
Glideslope Superflag
P1006
38
Output
Table 60 Navigation Superflag Output
The output supplies not less than 500 mA on a 28 volt system and 250 mA on a 14 volt system with
the output voltage at (Aircraft voltage – 3VDC) when the flag is to be out of view. The output voltage
with respect to ground is less than 3 VDC when the flag is to be in view.
6.1.13.2 RMI/OBI Electrical Characteristics
Description
Connector Pin
Signal Type
Main OBI Clock
P1001
43
Output
Main OBI Sync
P1001
45
Output
Main OBI Data
P1001
44
Output
Table 61 P1001 OBI Output
Description
Connector Pin
Signal Type
VOR OBI Clock
P1006
25
Output
VOR OBI Sync
P1006
26
Output
VOR OBI Data
P1006
27
Output
Table 62 P1006 OBI Output
The output is active low.
6.1.14 DME Tuning
Note: This section is N/A for AeroNav 880/780.
The AeroNav XXX can channel a DME based on the tuned VLOC frequency. The AeroNav XXX can be
connected to a DME via 2x5, BCD, Slip parallel, or King Serial DME channeling format.
Содержание 700-00179-700
Страница 2: ...Blank Page...
Страница 228: ...Honeywell International Inc Do not copy without express permission of Honeywell...