manualshive.com logo in svg

Bender LINETRAXX RCMS150, Руководство пользователя

Поделиться
Скачать
Bender LINETRAXX RCMS150 Скачать руководство пользователя страница 8

Important information

8

RCMS150_D00259_01_M_XXEN/08.2021

1.6 Warranty and liability

Warranty and liability claims in the event of injury to persons or damage to property are 
excluded if they can be attributed to one or more of the following causes:

 

Improper use of the device.

 

Incorrect mounting, commissioning, operation and maintenance of the device.

 

Failure to observe the instructions in this operating manual regarding transport, 
commissioning, operation and maintenance of the device.

 

Unauthorised changes to the device made by parties other than the manufac-
turer.

 

Non-observance of technical data. 

 

Repairs carried out incorrectly and the use of replacement parts or accessories not 
approved by the manufacturer.

 

Catastrophes caused by external influences and force majeure.

 

Mounting and installation with device combinations not recommended by the 
manufacturer.

This operating manual, especially the safety instructions, must be observed by all per-
sonnel working on the device. Furthermore, the rules and regulations that apply for ac-
cident prevention at the place of use must be observed.

1.7 Disposal

Abide by the national regulations and laws governing the disposal of this device. Ask 
your supplier if you are not sure how to dispose of the old equipment. 
The directive on waste electrical and electronic equipment (WEEE directive) and the di-
rective on the restriction of certain hazardous substances in electrical and electronic 
equipment (RoHS directive) apply in the European Community. In Germany, these pol-
icies are implemented through the "Electrical and Electronic Equipment Act" (ElektroG). 
According to this, the following applies:

 

Electrical and electronic equipment are not part of household waste. 

 

Batteries and accumulators are not part of household waste and must be dis-
posed of in accordance with the regulations.

 

Old electrical and electronic equipment from users other than private households 
which was introduced to the market after 13 August 2005 must be taken back by 
the manufacturer and disposed of properly.

For more information on the disposal of Bender devices, refer to our homepage at 

www.bender.de > Service & support

.

Содержание LINETRAXX RCMS150





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды