Bender ISOMETER isoNAV685-D Скачать руководство пользователя | Manualshive

Страница: 39 / 69

background image

Device communication

Device communication

isoNAV685-D_D00215_02_M_XXEN/04.2017

39

11.4 Web server

The ISOMETER® has an integrated web server which displays ISOMETER® data comforta-
bly on every PC via a web browser. The web server can be used to read out measured val-
ues and parameterise the ISOMETER®s. You can access the web server by entering the IP
address of the ISOMETER® into the browser (e.g. http://192.168.0.5). The Info menu provi-
des information about the ISOMETER®‘s IP address (see

10.1 (6.0) “Info” on page 37

).

The web server offers the following functions:
    • Visualisation
         • Indication of device information (e.g. device type, software version, etc.)
         • Indication of current device settings.
         • Indication of alarm messages.
         • Indication of the Modbus information of the individual parameters.
         • Indication of the interfaces in use.
         • Overview of the current measured values.
         • Detailed graphic representation of the insulation resistance (isoGraph).
         • Fast and simple visualisation without any programming.
    • Parameter setting
         • Easy and fast parameter setting of the device.
         • Easy assignment and edition options of device and measuring channel texts.
    • Maintenance
         • Data storage of specific events for fast support by Bender Service.

A maximum of 5 TCP/IP connections can be used simultaneously.

Only one device may access the web server at the same time. If several de-
vices try to access the web server it may result in timeouts.

Web server device menu (first level)

Legend for web server device menu (first level)

The write access is deactivated by default in the device menu (= Deny). To
be able to set parameters via the web server the write access must first be
activated in the device menu (= Allow) (see

“Write access” on page 35

).

Use the web server preferably with the following web browsers:
Google Chrome, Mozilla Firefox or Internet Explorer.

1

START

Indication of general device information.

2

DEVICE

Indication of an overview of alarm values and measured values.
Indication of the settings. Settings can be changed here.

3

ALARMS

Indication of alarm messages.

4

PARAMETER
ADDRESSES

Activate and deactivate the indication of the Modbus information by
selecting or deselecting the selection box for the question "Display
additional Modbus information for each parameter?".

1
2
3
4

«
...
37
38
39
40
41
...
»

Содержание ISOMETER isoNAV685-D






































































Отзывы:

Нет отзывов

Похожие инструкции для ISOMETER isoNAV685-D

Бренд: Han Seung Страницы: 2

Бренд: VeEX Страницы: 842

Бренд: WalkLAB Страницы: 16

Бренд: UEi Страницы: 8

Бренд: +GF+ Страницы: 64

Бренд: +GF+ Страницы: 12

Бренд: +GF+ Страницы: 48

Бренд: ADA INSTRUMENTS Страницы: 27

Бренд: Tire-Safeguard Страницы: 6

Бренд: SIGLENT Страницы: 32

Бренд: AKCP Страницы: 16

Бренд: Swann Страницы: 106

Бренд: GAGEMAKER Страницы: 36

sound SMART RLT Sport

Бренд: VCA Страницы: 36

Бренд: Agilent Technologies Страницы: 26

SensoControl ServiceJunior

Бренд: Parker Страницы: 18

Бренд: Panametrics Страницы: 224

Бренд: Danfoss Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды