manualshive.com logo in svg

Bender ISOMETER isoNAV685-D-B, Руководство пользователя

Поделиться
Скачать
Bender ISOMETER isoNAV685-D-B Скачать руководство пользователя страница 46

Technical data

Technical data

isoNAV685-D-B_D00264_03_M_XXEN/06.2017

46

Push-wire terminals X1:

Nominal current................................................................................................................................................................................. ≤ 8 A
Conductor sizes.........................................................................................................................................................................AWG 24-16
Stripping length............................................................................................................................................................................... 10 mm
rigid/flexible .......................................................................................................................................................................0.2…1.5 mm²
flexible with ferrule without plastic sleeve......................................................................................................................0.25…1.5 mm²
flexible with TWIN ferrule with plastic sleeve ...............................................................................................................0.25…0.75 mm²

Other

Operating mode........................................................................................................................................................ continuous operation
Mounting (0°) .........................................................................................display oriented, cooling slots must be ventilated vertically 

5)

Degree of protection internal components .........................................................................................................................................IP40
Degree of protection terminals  ...........................................................................................................................................................IP20
DIN rail mounting acc. to.............................................................................................................................................................IEC 60715
Screw fixing ..................................................................................................................................................... 3 x M4 with mounting clip
Enclosure material................................................................................................................................................................polycarbonate
Flammability class................................................................................................................................................................................. V-0
ANSI code ...............................................................................................................................................................................................  64
Dimensions (W x H x D) .............................................................................................................................................. 108 x 93 x 110 mm
Weight ........................................................................................................................................................................................... < 390 g

1)

 At a frequency > 200 Hz, the connection of X1 must be insulated. Only permanently installed devices which at least have over-

voltage category CAT2 (300V) may be connected.

2)

 Indication limited outside the temperature range -25…+55 °C.

3)

 

U

s

 [Volt] = supply voltage ISOMETER®

4)

 This is a class A product. In a domestic environment, this product may cause radio interference. In this case, the user may be

required to take corrective actions.

5) Recommendation: Devices mounted at 0 ° (display-oriented, cooling slots must be ventilated vertically).

For devices mounted at an angle of 45°, the max. working temperature is reduced by 10 °C.
For devices mounted at an angle of 90°, the max. working temperature is reduced by 20 °C.

15.2 Standards and certifications

The ISOMETER® has been developed in compliance with the following standards:

    • DIN EN 61557-8 (VDE 0413-8):2015-12

    • IEC 61557-8:2014-12

    • IEC 61557-8:2014/COR1:2016

    • DIN EN 61557-8 Ber 1 (VDE 0413-8 Ber 1):2016-12

Содержание ISOMETER isoNAV685-D-B
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды