Bender grass valley KMX-4911, Быстрый старт

Страница: 9 / 25

3
KMX-4911
Quick Start Guide
• KMX-4911 Quick Start Guide (this document)
In addition to the above, you will need the following (not supplied):
• Up to 4 displays
• Client PC (see below for system requirements)
• Display cables (to connect your multiviewer to displays)
System Requirements for a Client PC
A client PC or laptop meeting the following requirements is required to access the XAdmin
Web client, and the other Kaleido-X client applications.
Step 1: Physical Setup
To set up the multiviewer hardware
1 Referring to your GV Node Quick Start Guide, mount your KMX-4911 multiviewer cards
and their associated rear panel in the housing frame.
In the case of a rear panel covering multiple slots, make sure to install at least one card
in the leftmost slot (the one with the smallest slot number). This card position is
designated as
card A, and is considered as your system’s master card. You cannot
operate a system without a master card.
Leave the frame door open so that you can monitor the cards’ LEDs.
The KMX-4911 cards start up. The startup sequence takes approximately two minutes,
during which time the cards’ Status LED are blinking orange.
Note:
In line with our commitment to environmental preservation, only the
Quick Start Guide for your multiviewer model, and some ancillary
documents (e.g., welcome letters, warranty cards) are distributed in printed
form. You can obtain the latest version of the Kaleido-X User’s Manual,
database samples, Quick Start guides and hardware reference manuals for
all multiviewer models, as well as the Release Notes, from the
Documentation Library section of Grass Valley’s website. (Refer to the
Documentation section of the Release Notes for a complete list.) Software,
drivers, and useful data are available from the Downloads section of the
website.
Operating system Windows XP Professional, Windows 7, Windows 8, or Windows 8.1
Processor Core 2 Duo at 2 GHz, or better
Memory At least 2 GB of RAM
Disk space At least 2 GB free
IMPORTANT
If you need to install or momentarily remove a rear module, make sure to first
remove any cards found in the slots covered by the rear module.