manualshive.com logo in svg

Bender COMTRAXX MK2430, Руководство пользователя

Поделиться
Скачать
Bender COMTRAXX MK2430 Скачать руководство пользователя страница 53

53

MK2430_D00129_02_M_XXEN/09.2019

8.  Menu mode: Operation and setting

8.1    Switching on and calling up the main menu

If the MK2430 is connected to the voltage supply, the following information appears on 
the display for approx. 3 seconds. Details about the address and the firmware version of 
the device are displayed. This information is also available in the "Info" menu.

If there are no messages pending, the standard display will be shown when the starting 
procedure is completed.

The TMK-SET software allows you to change the standard display and the message 
texts. 

If the MK2430 has not been turned on for several days, a longer time may
be required for start-up (approx. 30 seconds). In this case, enter the time
and date again.

MK2430-11   Addr.:001
Software 4.02    D228
Date:        02.05.12
  www.bender.de

SYSTEM READY!

             09:50

Содержание COMTRAXX MK2430





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды