Bender COMTRAXX MK2430, Руководство пользователя

Страница: 10 / 84

Important information
10 MK2430_D00129_02_M_XXEN/09.2019
 
Improper use of the device.
 
Incorrect mounting, commissioning, operation and maintenance of the device.
 
Failure to observe the instructions in this operating manual regarding transport,
commissioning, operation and maintenance of the device.
 
Unauthorised changes to the device made by parties other than the manufac-
turer.
 
Non-observance of technical data.
 
Repairs carried out incorrectly and the use of replacement parts or accessories not
approved by the manufacturer.
 
Catastrophes caused by external influences and force majeure.
 
Mounting and installation with device combinations not recommended by the
manufacturer.
This operating manual, especially the safety instructions, must be observed by all per-
sonnel working on the device. Furthermore, the rules and regulations that apply for ac-
cident prevention at the place of use must be observed.
1.7 Disposal
Abide by the national regulations and laws governing the disposal of this device. Ask
your supplier if you are not sure how to dispose of the old equipment.
The directive on waste electrical and electronic equipment (WEEE directive) and the di-
rective on the restriction of certain hazardous substances in electrical and electronic
equipment (RoHS directive) apply in the European Community. In Germany, these pol-
icies are implemented through the "Electrical and Electronic Equipment Act" (ElektroG).
According to this, the following applies:
 
Electric and electronic equipment are not to be included in household waste.
 
Batteries and accumulators are not to be included in household waste but must
be disposed of in accordance with the regulations.
 
Old electrical and electronic equipment from users other than private households
which was introduced to the market after 13th August 2005 must be taken back
by the manufacturer and disposed of properly.
For more information on the disposal of Bender devices, refer to our website at
www.bender-de.com -> Service & support.