Bender COMTRAXX CP305, Руководство пользователя, Страница: 31 / 72

COMTRAXX® CP305 - Control Panel
9 Display and operation
LED and display
Display in normal operation: There are no warnings or alarms pending.
•
The LED lights up green.
•
The display shows the programmed default display screen (start page).
You set parameters for the start page in the web operating application.
Display when warning or alarm messages are pending
•
The LED lights up red or in the colour assigned to the alarm.
•
Depending on the type of error, the display yellow (“Warning”) or red (“Alarm”). The
buzzer sounds at the same time. If the cause of the message cannot be remedied
immediately, you can mute the buzzer with the “Acknowledge” button.
•
Depending on the type of fault, the display has the colour assigned to the alarm. The
buzzer sounds at the same time (if configured). If the cause of the message cannot be
remedied immediately, the buzzer tone can be muted for the parameterised period of
time with the “Acknowledge” button.
•
The display shows details about the message. The message continues to be displayed
visually until it is corrected.
•
If there are several simultaneous messages, they are displayed alternately. The LED has
the colour of the alarm with the highest priority.
Header
Date and time
•
Date and time (only if no large clock is created on the start page)
NFC logo
•
The NFC logo is only visible when the NFC interface is activated.
Lock
•
not logged in
•
PIN deactivated or PIN entered and logged in
Menu
•
See separate chapter
As long as you are not logged in to the device as an administrator, you can display the menu
items but not make any changes and/or modify settings. Details can be found in the chapter
“Settings on the device”.
Stopwatch active
CP305_D00425_00_M_XXEN_09.2022 31