Safety instructions
7
2.3 Device-specific safety instructions
2.4 General safety instructions
Bender devices are designed and built in accordance with the state of the art and ac-
cepted rules in respect of technical safety. However, the use of such devices may intro-
duce risks to the life and limb of the user or third parties and/or result in damage to
Bender devices or other property.
Use Bender devices only:
– as intended
– in perfect working order
– in compliance with the accident prevention regulations and guidelines appli-
cable at the location of use
Eliminate all faults immediately which may endanger safety.
Do not make any unauthorised changes and only use replacement parts and opti-
onal accessories purchased from or recommended by the manufacturer of the
devices. Failure to observe this requirement can result in fire, electric shock and
injury.
Reference signs must always be clearly legible.
CAUTION
Danger due to inappropriate power generators!
The VG12 safety distributor is only suitable for single-phase power
generators with AC 230 V. VG12 can conduct a maximum of 16 A.
CAUTION
Danger during insulation and voltage tests!
The VG12 safety distributor must be disconnected from the mains for the
duration of the test. Check the correct connection of the VG12 safety
distributor when recommissioning it. Perform a functional test according to
the instructions in the chapter
