12
4. Installation and connection
4.1 Installation
The cover of the VG12 must be unscrewed prior to installation. Mount the VG12 safety
distributor with four M4 screws to the power generator. Make sure that the mounting
parts have the required stability so that they are not destroyed by the typical vibrations
of the power generator. Avoid sharp edges and corners. Secure the mounting screws
via lock washers, spring washers or the like.
4.1.1 Dimension diagrams
Fig. 4.1: Drilling template
DANGER
Risk of an electric shock!
Do not carry out installation work while the power generator is
running. Make sure that the power generator is not activated during
installation work. Work activities on the running power generator
may cause severe injuries!
163 mm
11
3
