Bender ATICS Series, Руководство пользователя, Страница: 53 / 104

ATICS-DIO_D00080_03_M_XXEN / 04.2021 53
ATICS-…-DIO
6.2.3.1 Test menu 1: Autom. changeover
Autom. changeover Test of the changeover function. The device switches to the redundant line.
The changeover period t(1->2) is displayed. After the set time t(test) has
elapsed, the device switches back to the preferred line.
Cancel Return to test menu
The date of the test is saved in the test logger to send a reminder for the next test once the test interval
has elapsed. The messages from this test are also stored in the history memory.
6.2.3.2 Test menu 2: Manual changeover
Manual changeover Test of the changeover function. The device switches to the redundant line and
remains in this switch position. The changeover period t(1->2) is displayed. The device does not switch
back to the preferred line until the "RESET" button has been pressed.
Cancel Return to test menu
The date of the test is saved in the test logger to send a reminder for the next test once the test interval
has elapsed. The messages from this test are also stored in the history memory.
I
r
isk
that the test is accidentally not completed.
If the test menu 3: "Manual changeover" is left after switching over to the redundant line, then the
ATICS® remains in this switch position and in "TEST" mode.
- Wait until "Quit: RESET" appears on the display.
- Press the "RESET" button.
- Check whether the ATICS® has switched to the preferred line.
Autom. changeover
Cancel Autom. changeover
Test
t (1->2): 457ms
t (Test): 10s
Quit: RESET
Manual changeover
Cancel Manual changeover
Test
t (1->2): 346ms
t (Test): --
Quit: RESET