manualshive.com logo in svg

Bender ATICS-2-63A-ISO, Руководство пользователя

Поделиться
Скачать
Bender ATICS-2-63A-ISO Скачать руководство пользователя страница 8

8 

ATICS-2-ISO_D00046_04_M_XXEN / 03.2021

General instructions 

1.5 

Inspection, transport and storage

Check the shipping and device packaging for transport damage and scope of delivery. The following 
must be observed when storing the devices:

1.6 

Warranty and liability

Warranty and liability claims in the event of injury to persons or damage to property are excluded in 
case of:

•  Improper use of the device.
•  Incorrect mounting, commissioning, operation and maintenance of the device.
•  Failure to observe the instructions in this operating manual regarding transport, commission-

ing, operation and maintenance of the device.

•  Unauthorised changes to the device made by parties other than the manufacturer.
•  Non-observance of technical data. 
•  Repairs carried out incorrectly.
•  Use of accessories and spare parts not recommended by Bender.
•  Catastrophes caused by external influences and force majeure.
•  Mounting and installation with device combinations not recommended by the manufacturer.

This operating manual and the enclosed safety instructions must be observed by all persons working 
with the device. Furthermore, the rules and regulations that apply for accident prevention at the place 
of use must be observed.

1.7 

Disposal of Bender devices

Abide by the national regulations and laws governing the disposal of this device. 

For more information on the disposal of Bender devices, refer to 

www.bender.de/en -> Service & support.

1.8 

Safety

If the device is used outside the Federal Republic of Germany, the applicable local standards and regu-
lations must be complied with. In Europe, the European standard EN 50110 applies.

 

I

D

anger

! 

Risk of electrocution due to electric shock! 

Touching live parts of the system carries the risk of: 

•  A fatal electric shock
•  Damage to the electrical installation
•  Destruction of the device

Содержание ATICS-2-63A-ISO









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды