manualshive.com logo in svg

Bender ATICS-2-63A-ISO, Руководство пользователя

Поделиться
Скачать
Bender ATICS-2-63A-ISO Скачать руководство пользователя страница 59

 

ATICS-2-ISO_D00046_04_M_XXEN / 03.2021 59

ATICS-2-63A-ISO

6.2.4.2  Reset menu 2: SwitchBackLock

Delete  Disable the switch-back lock of the changeover function. The progress of the test is shown on 
the display. The device switches back to the redundant line.

Cancel 

Return to reset menu

 

i

There are different possibilities to disable the switch-back lock via gateway (COM4xx, CP700 etc.):  
• Via menu: Select "RESET > Switch-back lock". Requirement: Parameter setting must be possible 
(menu "Settings > Interface > Settings > On"). 
• Via Modbus control commands: Using the command "Changeover to line 1 or line 2". 
  Testing must be enabled (menu "Settings > Interface > Test > On").

6.2.4.3  Reset menu 3: Changeover

 

I

C

aution

! 

With increasing service life, the probability of component failure increases for every 

technical product. 

For operation according to IEC 61508-2, additional limit values are monitored (number of switching 
cycles, operating time, number of switching cycles in the event of a short circuit). If the set limit va-
lues are exceeded, the device displays a prewarning or an alarm.  
The alarm can be "deleted" by increasing the limit values. 
 
To ensure continued operation in accordance with the IEC 61508-2 standard, the device must be re-
placed. 

 

i

Regardless of the IEC 61508-2 standard, the safe function of the device is of course still guaranteed 
due to the cyclical self-monitoring functions. 
 
Operation in accordance with DIN VDE 0100-710, DIN VDE 0100-718 or IEC 60364-7-710 is still possi-
ble if the prescribed measures are implemented (see chapter „Periodic verification and service“ on p. 
89).

Delete
Cancel

Delete

Содержание ATICS-2-63A-ISO









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды