manualshive.com logo in svg

Bender ATICS-2-63A-ISO, Руководство пользователя

Поделиться
Скачать
Bender ATICS-2-63A-ISO Скачать руководство пользователя страница 11

 

ATICS-2-ISO_D00046_04_M_XXEN / 03.2021 11

ATICS-2-63A-ISO

2 

Intended use

Transfer switching devices are used everywhere there is dependence on high availability from the pow-
er supply. The ATICS® automatic transfer switching and monitoring device is intended for the applica-
tion described in the chapter „System description“ on p. 13. When the preferred supply fails, the 
ATICS® automatically switches to the second supply.

Areas of application:

•  Group 1 and 2 medical locations according to DIN VDE 0100-710 and  

IEC 60364-7-710

•  Hospital main distribution boards (DIN VDE 0100-710)
•  Locations open to the public (DIN VDE 0100-718)
•  Emergency power supplies
•  Heating, air conditioning, ventilation, cooling
•  EDP, data centres
•  Fire extinguisher and sprinkler systems

Several versions of the ATICS® are available. They differ for example by switching over from two- or 
four-pole systems or by the load current (see „ATICS® tasks“ on p. 15). Please heed the limits of the 
range of application indicated in the technical data.

In order to meet the requirements of applicable standards, customised parameter settings must be 
made on the equipment in order to adapt it to local equipment and operating conditions.

Intended use includes following all the instructions in the operating manual and complying with the 
test intervals.

Any use other than that described in this manual is regarded as improper.

Содержание ATICS-2-63A-ISO









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды