Troubleshooting Guide
vii
Bend-Tech Dragon
Contents
10.14 Calculating Run Time in Mach3 . . 65
10.15 Restarting a Job in Mach3 after Torch
Failure . . . . . . . . . . . . . . . . . . . . . . . . . . 66
10.15.1 Editing the Macro . . . . . . . . . 66
10.15.2 Restarting the Job . . . . . . . . 67
10.16 Diagnosing Sensor, Cable, and Control
Box Problems . . . . . . . . . . . . . . . . . . . . . 68
10.16.1 Diagnosing a Sensor Issue . 68
10.16.2 Checking the Control Box . . 68
10.16.3 Checking Sensors . . . . . . . . 68
10.16.4 Reading ESS LED Status
Codes . . . . . . . . . . . . . . . . . . . . . . . . 69
10.16.5 Ethernet Jack LED Lights . . 70
10.17 Running Warp 9 Utility . . . . . . . . . 71
10.18 Mach3 Lost Communications while
Operating . . . . . . . . . . . . . . . . . . . . . . . . 71
10.19 Other Mach3 Errors . . . . . . . . . . . 72
10.19.1 Invalid Bootloader Signature 72
10.19.2 CryptoMemory Error . . . . . . 72
