Benchmark 5554-513, Руководство пользователя

Страница: 7 / 24

5554-513
22" ELECTRIC SNOW BLOWER
6
When working outdoors with a product, use an extension cord that is designed for
outside use. This type of cord is designated with "WM" on the cord's jacket.
Before using any extension cord, inspect it
for loose or exposed wires and cut or worn
insulation. It is possible to tie the extension
cord and power cord in a knot to prevent
them from becoming disconnected during
use. Make the knot as shown in the figure at
right, then connect the plug end of the power
cord into the receptacle end of the extension
cord. This method can also be used to tie two
extension cords together.
WARNING! The double-insulated system is intended to protect the user
from shock resulting from a break in the snow blower's internal insulation.
Observe all normal safety precautions to avoid electrical shock.
• Inspect the extension cord and the power cord on a regular basis. Look for
deterioration, cuts, or cracks in the insulation. Inspect the connections for
damage. Repair or replace the extension cord or the power cord if any damage
is found.
• Verify that the paddle and all moving parts have come to a complete stop, and
disconnect the snow blower from the power supply in order to prevent accidental
start-ups, before cleaning or performing any inspections or repairs.
• Do not abuse the extension cord. Do not carry the snow blower by the power cord
or pull on the cord in order to disconnect it from the receptacle.
• Keep the extension cord away from heat, oil, and sharp edges in order to prevent
damage.
• If the extension cord is damaged in any manner while it is plugged in, disconnect
it from the outlet immediately.
• Prevent any possible disconnection of the power cord from the extension cord
while the snow blower is in use by using the cord retainer. Refer to the section
entitled Using the Cord Retainer.
• Unplug the snow blower and allow it to cool down before putting it into storage.
Store the snow blower indoors.
• Unplug the snow blower when it is not in use and before performing any
maintenance or repairs.
WARNING! Keep the extension cord clear of the working area. Position the
cord so that it will not get caught on obstacles while you are operating the snow
blower. Failure to do so can result in serious personal injury.