bemodern 600CF, Инструкция пользователя

Страница: 6 / 54

6
2.2 This gas appliance uses a single AAA type baLery which
supplies the power for the igniter used during the ignion
process. The baLery box which houses this baLery is located
between the decorave frame and the glass door panel in the
lower le hand corner. It may be necessary to remove the trim
to release the baLery cover. ( See page pages 23/25)
Remove the screw using the
small screwdriver supplied in the
fi;ngs and tools pack to access the baLery compartment as
shown in the diagram. Replace the baLery ensuring correct
There are two trim types available for this appliance. For full
details on the trim removal see pages 23 and 25. If the trim is
removed, always ensure it is stored somewhere safe where it
cannot be damaged.
BATTERY
TRIM
The glass door can be removed for cleaning or to access the
ceramic logs and pilot area for maintenance.
The special Allen key supplied with the appliance should be
used to release the two door clasps features at the top of the
door. Insert the Allen key into the nut and rotate. The le
hand nut should be rotated to the le and the right hand key to
the right, as shown.
Once released, the door will open on its lower hinge. Slowly
open the door unl it comes to rest. It is possible to clean the
glass while it is in this posion.
It is now possible to remove the complete door assembly if
required.
With the door clasps released,
first slide the door frame to the
le< so that it comes off the le hinge pin.
Now slide the door frame to the right so it comes off the right
hinge pin. The door will now come away from the appliance.
Store the door where it cannot be damaged.
Never run the appliance with a damaged or broken glass panel
GLASS door
USER INSTRUCTIONS