Operation Instructions
➢
The Controls
▪
Switching ON / OFF
·
Use the ON / OFF switch to power on the heater (set it to standby mode).
·
In standby mode, the heater can be operated either manually by the switches located on the left and right hand
sides of the canopy or by the mantel switches located at the right side wall of mantel or by the supplied remote
control.
▪
Manual Operation
·
NOTE:
The heater only starts working if the set temperature is higher than the ambient room temperature.
Heater powered off
Heater powered on, set to standby mode
-
Press to switch the flame effect ON / OFF
-
Press and hold to toggle between 5 different flame dim levels
Press to activate low level heating (1000W)
Press to activate high level heating (2000W)
