12
13
HOW TO USE
For back wash, turn the control knob to the left
towards the “ “ position.
For front/feminine, turn the control knob to the
right towards the “ “ position.
For the self cleaning function, turn the control
knob to the middle towards the “ “ position.
The further the knob is turned, the higher the
water pressure will be. Press the button to
activate the flow of water.
If there are no immediate leaks, check again in
about 5-10 minutes and your Wellspring 100 is
ready for use!
If any leaks occur, check all rubber washers and
make sure all connections are tight and secure.
13. Slowly turn the
water supply valve
back on, check for
leaks, and test the unit
for functionality.
14. After installing your
bidet attachment,
check to see if there is a
gap between the toilet
base and toilet seat.
INSTALLATION (CONT.)
15. If necessary, place
the bumpers on the
underside of your toilet
seat as indicated above.
