Bematech SB-8700 HR, Быстрый старт

Страница: 7 / 32

7
ENGLISH
Ports I/O
Place of installation
The place of installation should meet the following conditions:
- Have an electrical network with a ground connection, with a three pin plug (2 poles and the ground) in order
to be compatible with the cable of the equipment.
- Have enough space for its operation and preventive and corrective maintenance;
- The feeding line should be exclusive for the equipment, unless it is used for other compatible equipment and
it should not overpass the maximum consumption of the line. Photocopy machines, electrical motors and any
other high consumption equipment should be installed isolated from this equipment;
- Advisably, the floor should not be wooden, in order to avoid electrostatic shocks on the equipment;
- Install the equipment in a stable place, with no vibrations, since some of its components are movement
sensitive;
- It is not advisable to install the equipment on a mobile table (with wheels) and/or that the operator has chair
with wheels, since this may cause electrostatic shocks on the equipment;