Bematech S-100W, Краткое руководство по эксплуатации

Страница: 36 / 58

Quick Operation Guide - Wireless Handheld Laser/CCD Scanner
36
37
Laser Safety
The laser scanner complies with safety standard IEC 60825 -1for a Class I laser
produce. It also complies with CDRH as applicable to a Class IIa laser product.
Avoid long term staring into direct laser light.
Radiant Energy:
The laser scanner uses one low-power visible laser diodes operating at 650nm
in an opto-mechanical scanner resulting in less than 3.9μW radiated power as
observed through a 7mm aperture and averaged over 10 seconds.
Do not attempt to remove the protective housing of the scanner, as unprotected
laser light with a peak output up to 0.8mW would be accessible inside.
Laser Light Viewing:
The scan window is the only aperture through which laser light may be observed
from this product. A failure of the scanner motor, while the laser diode continues
to emit a laser beam, may cause emission levels to exceed those for safe operation.
The scanner has safeguards to prevent this occurrence. If, however, a stationary
laser beam is emitted, the failing scanner should be disconnected from its power
source immediately.
Adjustments:
Do not attempt any adjustments or alteration of this product. Do not remove the
protective housing of the scanner. There are no user-serviceable parts inside.