Bematech S-100W, Краткое руководство по эксплуатации

Страница: 29 / 58

Quick Operation Guide - Wireless Handheld Laser/CCD Scanner
28
29
The LED light in RED as in charge, and light in BLUE when full charged.
We call this “Smart Charge”, as battery life is well depended on the charging
number of times, so only charge the batteries when necessary by following the
abovementioned procedures to prolong your battery life.
You may also set up auto-charging as every time the scanner is placed into
the cradle. Follow and scan the appropriate barcode symbols to set up from
programming section of this booklet.
Note:
• For first charging, always charge the batteries over 5 hours continuously to
prolong your battery life.
• After every full charge, you may use the scanner for 8 hours continuously.
• Recommended charging environment is temperature in 0°C~35°C
(32°F~95°F).
Once the scanner is well situated in the cradle, press down any one of the small
buttons at the side of LED lamp to start charging (Shown as Below).