Shampoo
Bowls
8400 BACKWASH
SHAMPOO BOWL
PAGE 1 of 4
8400
Belvedere USA Corporation
A wholly owned subsidiary of The Wella Corporation
One Belvedere Boulevard, Belvidere, Illinois 61008
Printed in U.S.A. E.C.O. 9162 4001148 Rev. 04-05
8400 BACKWASH SHAMPOO BOWL
WITH MODEL 522 FIXTURE AND
603 BACKFLOW PREVENTER
INSTALLATION AND PLUMBING
MOUNTING
SCREW
ATTACH HOSE RECEIVER TO BOWL
(STEPS 2 thru 4).
2. To make hose receiver installation easier,
complete these steps to cut screw threads
in the mounting holes:
S
Take a mounting screw and drive it 2 or
3 turns into one hole.
DO NOT OVERTIGHTEN.
S
Remove the screw.
S
Repeat for all four (4) mounting holes.
DRIVE
SCREW
IN 2 OR 3
TURNS
NOTE:
Read the instructions through before starting
to familiarize yourself with the components.
Any conformance with LOCAL CODES or
INSPECTIONS is the RESPONSIBILITY
OF THE PURCHASER.
1. Attach the fixture to the bowl according to
the instructions packed with the fixture.
3. Place the gasket
over the flange
on the bottom
of the hose
receiver.
HOSE
RECEIVER
GASKET
4. Place the hose receiver and gasketin the bowl
.
Install the Mounting Bracket on the bottom
side of the Bowl with four (4) embossed
corners facing upward, against the
bottom of the Bowl. Secure with four (4)
Screws.
DO NOT OVERTIGHTEN.
MOUNTING
SCREW
EMBOSSED
CORNER
(UP)
