Beluk KSR-V, Техническая документация инструкция

Страница: 17 / 19

Technical Documentation
KSR-V – Capacitor-Bank Protection Relay
Rev. 05
17
5.5.6 Submenu "setup

load defaults
This resets all relay settings, parameters and alarm settings to standard values.
5.5.7
Submenu “setup 
reset relays
This resets all relays, which are configur
ed with the “manual reset” setting. By selection of this menu entry,
the relays are set back to inactive state. A new alarm will re-activate the hold state for the relay.
5.6 Submenu "device info"
This menu simply shows some information about the KSR-V device.

SW: software version number

HW: hardware revision number

SN: serial number of the device

FLAGS: options of the device
By pushing the buttons 2 & 3 simultaneously the device can be reset to factory settings.
This function will reset all settings back to factory setting
5.7
Submenu "reset min/max”
This resets the minimum and maximum values of the measured voltages.
!