Reference Manual
Power Analyzer EMM5
Rev. 11
2018-07
9
4
User Interface
The EMM5 user interface uses a combination of a graphical LC display with automatic backlight and four multi-function
softkeys. The action, a key performs, depends on the actual context and is given by small icons at the bottom of the
display. This means a much more easy and intuitive usage of the device, even in complex situations.
After the supply voltage is connected to the device, it will take a short time to power up and initialise itself. During this
time, the display remains empty. After the power-up-procedures have been completed, an entry-screen is displayed.
The keys on the left and the right (icon is a capital “M”) will proceed to main menu.
If, after waiting for some seconds of set-up-time, the display does not show the introduction screen or
is fully dark, it is possible that the display contrast is not set properly. The user would not be able to
navigate to the display contrast set-up menu in this case, so an additional possibility to set the contrast
is included in the introduction screen: press one of the two keys in the middle repeatedly to change contrast. If no
change can be seen, try the other key. The value is automatically saved for the next start.
4.1
Main menu
The main menu is the central point of the device's menu navigation. It shows the following items:
MEASUREMENT: This submenu contains the measured values
AUTO-ROLL: Measurement display with automatic switching to the next value
HARMONICS: This submenu shows the single harmonics for the input channels (voltages L1-N, L2-N, L3-N and
currents I-1, I-2, I-3, I-N)
WORK: This submenu contains the work counters
SETUP: The device setup can be found inside this menu
DEVICE INFO: This submenu displays some information about the device
EVENTRECORDER: Contains all stored alarm including timestamp and grid data. (The event recorder is available
in devices with the option –DM only)
KEYS:
The user can navigate through the menu entries by use of the "
"and "
” keys. On the top left side a tiny arrow shows
which item is actually selected. By pressing "
", one can enter the selected submenu.
!
