Remote Control – part 1 (Pairing)
p
(
g)
Equipment used in this test:
1 TRUE device programmed for Right side
1 TRUE device programmed for Left side
Optional – 1 Direct Line TV Link (SAS).
1. Put the Remote Control in pairing mode.
DO NOT switch TRUE devices on yet
The SAS is not necessary for checking the functionality of the Remote Control. If a
SAS is used for this test it needs to be paired with the TRUE devices prior to this
test.
•
DO NOT switch TRUE devices on yet.
•
Remove battery cover on Remote Control
•
Press the pairing button using a point instrument.
•
Check that Remote Control display switch to pairing mode.
•
Pairing mode will be active for 20 seconds
Pairing button.
•
Pairing mode will be active for 20 seconds.
2. While Remote Control is in pairing mode
switch on both TRUE devices.
Sound sample:
Delayed Activation
Searching for devices.
•
TRUE devices will play the
Delayed Activation
sound
•
When each of the devices has been detected, the TRUE devices will
play the
Pairing Complete
tune.
•
A delay between the two paring functions can be
Sound sample:
Pairing Complete
experienced. When one side is paired the search
for the other side will continue.
•
Check that Remote Control display show:
Both sides connected
Left side connected.
Searching for right side
Both sides connected.
Functional
Test
– Quick
Guide
|
Global
Technical
Operation
|
Page
6