2014-08-13 – Page 1
Instructions Sheet
www.belson.com
TRADITIONAL RECTANGULAR ACCESSIBLE TABLE
Inspect the shipment for damage and conduct a thorough
inventory to determine that all parts and hardware are present and
verify that all tools needed for assembly are on hand.
We are not responsible for items discovered missing or
damaged after 72 hours from time of delivery!
If you have a question regarding
anything covered in this manual,
please contact your sales representative.
It is very important
to use care when assembling
and moving
the equipment.
Do not drag the equipment across any surface.
This equipment
requires periodic cleaning with a sponge or
soft cloth and a solution of mild detergent and
water. You may
also use a solution of 50/50 bleach/water
if necessary. Do not
clean with a solvent or petroleum-based products.
A pressure washer may be used for cleaning (follow
manufacture
r’s recommendations
for nozzle type and distance
from surface to avoid damaging finish).
You may use a hair dryer to smooth out the plastisol/PVC
coating if it becomes dented.
Furniture must not be used other
than for its intended purpose. It
should be inspected regularly for
loose, missing or broken hard-
ware and general instability.
Furniture that is damaged or
appears to be unstable must be
removed from service and
repaired or replaced. Repairs
must be made using only factory
authorized parts and methods.
Recommended Crew:
Minimum 2 People
Tools Required:
Cardboard from Packaging / Drop Cloth
Level
Ratchet with 1/2” Socket
1/2” Open-End or Box-End Wrench
Assembly Time (approximately):
1 hour
WARNING!
627 Amersale Drive
Naperville, IL 60563
Phone: (800) 323-5664
Fax: (630) 897-0573
