Side Frame
Main Link Axis
Packing Screw
Toe board bar
4. Installation
3) Lift chair base from pallet into the
installation location.
Be sure to lift chair under the side frame
and main link axis as shown in Figure 2.
1) Place chair carton close to installation
location.
Remove all the staples fixing the carton to
pallet, or cut the carton just above the
stapled line, and remove the carton.
(See Figure 1.)
Figure 1
Figure 3
4) Before attaching chair to the electrical
power source, remove red shipping bolt
from the seat structure using a 13mm
socket. (See Figure3.)
5) Remove the following items from chair
packaging:
• Backrest Frame Assembly
• Plastic Base Cover
• Small Carton Box Containing Armrests,
Headrest Mechanism and Bag of Hardware.
Figure 2
2) Using a 10mm socket, loosen and remove
two packing screws holding the chair base
into pallet. (See Figure 2.)
Staples
Red Shipping Bolt
CAUTION
Do not lift chair by toeboard bar
Do not connect in the power supply line
before removeing the red tagged
shipping bolt.
CAUTION
4-1. Unpacking the Chair Base
- 4 -