- 23 -
Indicator
Function Switch
Dr NUMBER ＝０ ↓
②
③
FLUSH OUT Ｆ＝↓
(－)＝HP (＋）＝HP＋
④
BEEP＝ON Ｆ＝↓
（－）＝OFF (＋）＝ON
⑤
LP.MODE＝HOLD Ｆ＝↓
（－）＝FOOT (＋）＝HOLD
⑧
SPRAY＝４MODE Ｆ＝↓
（－）＝２ (＋）＝４ MODE
⑨
＝LINK Ｆ＝Ｅ
（－）＝IND (＋）＝LINK
＊
ALARM TYPE ＝０ Ｆ＝↓
０ １ ２ LP (３) PUSH
⑥
⑦
M LMT＝３STEP Ｆ＝↓
（－）＝３ (＋）＝５STEP
ＢＥＬＭＯＮＴ
⑩
①
TIMER SET Ｆ＝↓
＝ START
(Example) Case of "with switch tone"
(Example) Case of holder mode
2-17. Function switch
2-17-1. Contents and sequence of function switch
The contents of display on the indicator on the doctor membrane switch panel change sequentially
each time when the function switch is pressed to select a desired setup. Contents and sequence of
function switch setup are described below.
Setup and operation of dental timer
Selection of doctor number
Selection and operation of flushout
Selection and change of key touch tone
Selection of handpiece light switching-on timing
Selection of alarm tone upon time-up of dental timer
Selection of number of steps of micromotor limit rotation speed
Selection of micromotor spray mode
Selection of interlocked action of cupfiller and bowl flush
Return to normal action.
* Normal action is restored during setup if the next operation
is not applied within about 10 seconds.
1
8
3
5
9
10
4
7
6
2
Ｅ Ａ
4. DESCRIPTION OF OPERATION AND FUNCTIONS OF COMPONENTS