Auto Switch
1) Preset Control
The chair has two preset positions.
(Preset-1 and Preset-2) Momentarily depress the
auto mode stick switch to left side, the chair will
move to the preset-1 position automatically.
(Preset-2 is operated by right side.)
2) Auto Return
Momentarily depress the auto mode stick switch to
upward, the chair will return to the initial position.
(The seat is fully lowered and the backrest is in the upright position.),
3) Last Position Memory
Momentarily depress the auto mode stick switch to downward at the reclined backrest position (treatment position),
the backrest will raise to the mouth rinsing position automatically. Momentarily depress the auto mode stick switch
to downward again, the backrest will recline to the previous treatment position automatically.
4) Emergency Stop
During automatic procedure (Preset, Auto return and Last position memory), depress of any side of the
stick switch will cancel the automatic movement immediately.
Note : Do not depress the auto mode stick switch for over 3 seconds, because the memorized position
in auto mode may be changed.
1-4. Stick Switch
Manual Switch
1) Seat Lifting
Keep depressing the manual mode stick switch to upward until the seat is lifted up to the desired position.
2) Seat Lowering
Keep depressing the manual mode stick switch to downward until the seat is lowered to the desired position.
3) Backrest Reclining
Keep depressing the manual mode stick switch to left side until the backrest is reclined to the desired position.
4) Backrest Raising
Keep depressing the manual mode stick switch to right side until the backrest is rased up to the desired position.
Auto Switch
Manual Switch
4. DESCRIPTION OF OPERATION AND FUNCTIONS OF COMPONENTS
- 10 -
1) Legrest raising angle and rollup extension are
automatically controlled by backrest angle at
preset positions only.
You can’t manually raise legrest nor use
rollup extension.
Positional relation between Backrest position and
Legrest movement/Rollup extension.
Up tilt Limit position
Lay flat
Limit position
3
2
1
0
4
4
3
2
1
At the , & position of backrest
angle, rollup does not extend.
2
1
0
At position
At position
At position
At
position
At position
0
4
3
At the & position of
backrest angle,
rollup extends most