67.5
369
125
232.8
46.5
272
10.3
657
340
340
50
530
(73.5)
(42)
φ38.5
130°
10°
40°
40°
20°
160°
45°
45°
160
°
160
°
[6] INSTALLATION
6-1. Attach the light assembly to the light pole (Fig.6-1)
Pass the light cable through the light pole and insert the light pole joint into the light pole.
Fasten with two button screws (M6x8 ) .
6-2. Attch the light pole to the light post (Fig.6-2)
Insert the light pole to the light post. Fasten with screws.
Please refer to a installation instruction of the unit.
Light Cable
Light Head
Light Pole
Button Screw (M6x8)
Light Pole Joint
6-3. Connect the wire harness (Fig.6-3)
Attach the connectors of the light cable onto the dental light PCB and harness inside the cuspidor unit.
Wire colours and connectors for connection are shown in Fig.6-3.
See also the wiriring diagram on page2.
-3-
Light Pole
Light Post
1. Red
2. Yellow
3. -
1. Black
2. Bown
1. -
2. Orange
3. Purple
4. Blue
5. Green
2P Female
2P Male
3P Female
5P Female
Light Cable
Connect directly to a dental light PCB
Fig. 6-3
Fig. 6-2
Fig. 6-1