Belmont IO 5000TA Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 24

Belmont IO 5000TA Скачать руководство пользователя страница 3

Page

[1] MAJOR PARTS IDENTIFICATION

--------------------------------------------- 1

[2] SPECIFICATIONS

------------------------------------------------------------------- 1

[3] CLASSIFICATION

------------------------------------------------------------------- 1

[4] WIRING DIAGRAM

---------------------------------------------------------------- 2

[5] DIMENSIONS

------------------------------------------------------------------------- 2

[6] INSTALLATION

6-1. Attach the light assembly to the light pole ------------------------------------ 3

6-2. Attch the light pole to the light post ---------------------------------------------- 3

6-3. Attach the wire harness ---------------------------------------------------------- 3

[7] OPERATION

7-1. Mode selection switch ----------------------------------------------------------- 4

7-2. Touch-less switch ---------------------------------------------------------------- 4

7-3. Intensity switch --------------------------------------------------------------------- 4
7-4. Switching to the composite mode ------------------------------------------------ 4

[8] ADJUSTMENT OF THE BALANCE ARM

8-1. Adjustment of the tension of the balance arm -------------------------------- 5

8-2. Adjustment of the angle of the light head ------------------------------------- 5

8-3. Adjusting the tension of the light head ------------------------------------------- 6
8-4. Balance arm adjustment (lateral movement) ------------------------------------- 6
8-5. Converting the balance arm for left handed ------------------------------------- 6

[9] REPLACEMENT OF THE BULB

9-1. Removal of the reflector cover

------------------------------------------------- 8

9-2. Replacement of the bulb --------------------------------------------------------- 8

9-3. Inserting a new bulb ------------------------------------------------------------- 9

9-4. Attaching the reflector cover

---------------------------------------------------- 9

[10] CLEANING

--------------------------------------------------------------------------10

[11] MAINTENANCE AND INSPECTION

-----------------------------------------11

[12] BEFORE ASKING FOR REPAIRS

---------------------------------------------12

[13] ELECTROMAGNETIC COMPATIBILITY (EMC)

------------------------13

TABLE OF CONTENTS

«
1
2
3
4
5
...
»

Содержание IO 5000TA

























Отзывы:

Нет отзывов