[7] OPERATION
7-1. Mode Selection switch
Mode can be changed by dental light select switch on the unit.
Please refer to operating instruction of the unit.
7-1. Touchless Switch (Fig.7-1)
Approach a hand to the touchless switch within the reaction
zone to turn on/off for the light.
7-3. Switching to the composite mode (Fig.7-3)
During normal treatment mode, while the light is on, place
and hold your hand within the reaction zone for 2 seconds.
The light intensity will be automatically reduced to the
composite mode.
To switch back to the normal treatment mode, place your
hand by the sensor for 2 seconds again.
Green or Amber LED blinks in the composite mode.
-4-
7-2. Intensity Switch (Fig.7-2)
Push intensity switch.
High beam : Green LED turns on.
Low beam : Amber LED turns on.
High
Low
28,000Lux
22,000Lux
Green
Amber
Light Intensity
LED
LED
Intensity Switch
Touchless Sensor
Reaction Zone : 65mm
Light Intensity
LED
Composite
8,000Lux
Blink
Fig. 7-1
Fig. 7-2
Fig. 7-3