Belmont CREDIA G1, Руководство по эксплуатации, Страница: 23 / 49

Increase Decrease
DESCRIPTION OF OPERATION AND FUNCTIONS OF COMPONENTS
1 Cuspidor Unit Section
3
Cuspidor Unit Control Panel
1
Water heater switch
Switch for turning on/off the cupfiller water heater.
(The water temperature is set in around 36 degrees and water drips from
the cupfiller nozzle when the water in the water heater is heated.
This phenomenon is not a sign of failure.)
Make sure that water is poured into the cup before turning on the heater unit in order to prevent the
heater unit from heating the cup without water.
Heating of an empty water heater may result in burning of the heater.
2
Syringe air control
Make adjustment of syringe air by the syringe air control knob. (Refer to [ ADJUSTMENT OF PARTS]
sections.)
3
Syringe water control
Make adjustment of syringe water by the syringe water control knob.(Refer to [ ADJUSTMENT OF
PARTS sections.)
4
Bowlflush switch
Switch for cleaning of the cuspidor bowl. When this switch is turn on,
water comes out of the bowl flush nozzle and flushes the cuspidor bowl.
5
Service outlet (air)
Use this outlet to supply air to external equipment.
6
Service outlet (water)
Use this outlet to supply water to external equipment.
7
Service outlet water flow control
Use this knob to control the water flow rate supplied to outside. (Refer to [ ADJUSTMENT OF PARTS]
sections.)
CAUTION
18