Belmont CREDIA G1, Руководство по эксплуатации, Страница: 18 / 49

DESCRIPTION OF OPERATION AND FUNCTIONS OF COMPONENTS
1 Doctor Unit Section
1
Doctor Unit Control Panel
Chair Last Position Switch
Last position setup procedures
• When this switch is pressed in the fine-adjusted
treatment position, the chair moves to the rinsing
position. When the switch is pressed again, the
chair returns to the former treatment position.
Press any switches for stopping automatic
movement.
1. Move the chair to the rinsing position using
manual switches.
2. Upon deciding the desired rinsing position, keep
pressing last position switch < > for about
5 seconds. The buzzer sounds from the chair, and
setup has been completed.
3. To change the set position, perform the procedures
steps 1 and 2 above.
LP
Confirm that the patient is seated in the proper position before operation of the chair and keep your
eyes on the patient during operation. Be careful that the stool will not be caught in the gap between the
chair backrest and the headrest when the chair is operated with an auto-switch. Damage to the backrest
or stool may occur.
Move the chair to rinsing position
by chair manual switch
Keep pressing LP for about 5 seconds
CAUTION
13
• Water is supplied through the cupfiller nozzle and
bowl flush nozzle for a certain period of time when
this switch is pressed.
Cupfiller Switch