Belmont CP-ONE PLUS Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 96

Belmont CP-ONE PLUS Скачать руководство пользователя страница 43

Unit part

39

Doctor’s unit



Operation and display of the turbine

▪ When the turbine is picked up, the selected

rotation mode is displayed.
Four rotation modes are available: LL, LOW,
STD and HI. The degree of output changes when
the foot controller is stepped on.



HI

The revolution changes at a high rate
with respect to the amount of stepping.



STD

The revolution changes constantly.



LOW

The revolution changes at a low rate
with respect to the amount of stepping.



LL

The revolution changes at a rate lower
than LOW mode.

Use

on the operation panel to select and

change the rotation mode.
Two operation modes can be selected: two modes
(LOW and HI) and four modes (LL, LOW, STD
and HI).
See page 64 for details of setting.

▪ Adjust the water quantity of the turbine in the

same manner as the micromotor.

NOTICE

Before use, be sure to carefully read the package inserts and Instruction Manuals included with the
turbines to ensure proper use.

OPERATING INSTRUCTIONS

Output bar graph

(4-mode operation)

«
...
41
42
43
44
45
...
»

Содержание CP-ONE PLUS

































































































Отзывы:

Нет отзывов