Belmont CP-ONE PLUS, Руководство по эксплуатации, Страница: 40 / 96

Unit part
36
Doctor’s unit
(iii) Setting limit rotational speed
▪ When the page feed button
is pressed on the
water feeding quantity adjustment screen, the
screen changes to the page for setting the limit
rotational speed.
▪ Increase and decrease the limit rotational speed
with and .
▪ Refer to the following “(iv) The memory setting
of initial condition at power-on state for limit
rotation speed, ON/OFF of light pack and spray
condition (ON/OFF, only water or air)”.
The speed is reset to the previous speed if the
handpiece is returned to the holder, the mode is
changed or the main switch is turned off without
setting the memory.
(iv) The memory setting of initial condition at
power-on state for limit rotation speed, light
pack ON/OFF and spray (ON/OFF, only water
or air)
[Setting procedures]
1.
Pick the micromotor up from the holder.
2. Select the setting memory (M1, M2, M3,
M4) with .
3. Set the following items for desired
condition.

Limit rotation speed

light pack ON/OFF

spray (ON/OFF, only water or air)
4. Press the page feed button and display
the store button .
5. Confirm the setting and press and hold the
store button .
OPERATING INSTRUCTIONS
Limit rotational speed
(min
-1
)
DA-290N
DA-290N
DA-290N