Belmont CP-ONE PLUS, Руководство по эксплуатации, Страница: 10 / 96

General
6
1. Only experienced personnel should use this product.
2. The following items must be taken into consideration when installing equipment.
(1) Install in a location away from water or accidental splashing.
(2) Install in a location which will not be adversely affected by atmospheric pressure, temperature,
humidity, ventilation, sunlight, dust, air containing salt, sulfur and other substances.
(3) Take care to protect the equipment against tilting, vibrations and strong impacts, such as during
transportation.
(4) Equipment must not be installed in locations where chemicals are stored or gasses are generated.
(5) Be careful with the frequencies, voltages and allowable amperes (power consumption) of the power
supply.
(6) Make sure that all batteries are installed properly and in good working order (discharging curve,
polarity, etc.).
(7) Properly connect ground wires.
3. The following items must be taken into consideration when using the instrument.
(1) Make sure that equipment activates properly after checking switch contact, polarity, dial setting and
meters, etc.
(2) Make sure that the instrument is properly grounded.
(3) Make sure that all cables are properly connected and secured.
(4) Use of other instruments and appliances on the same power circuit is liable to cause errors and
incorrect flash output resulting in incorrect diagnosis or hazards.
(5) External circuits that may come in direct contact with the patient must be checked frequently.
(6) Make sure that all batteries are installed properly and in good working order.
4. The following items must be taken into consideration when using the equipment.
(1) Be sure to minimize the time and quantity required for diagnosis and treatment.
(2) Always assure that the overall equipment and patient are in a good condition.
(3) When an abnormality is found in the equipment or patient, take proper measures such as stopping the
instrument while assuring the patient's safety.
(4) Do not allow the patient to touch any part of the equipment.
5. The following items must be taken into consideration after use of the equipment.
(1) Follow the specified procedure for setting the control switches and dials, etc., to their original position
before turning OFF the instrument.
(2) Do not pull off cables by hand to avoid exerting an excessive force on them.
(3) The following must be taken into consideration regarding storage location.
a. Store the instrument in locations free from splashes of water.
b. Install in a location which will not be adversely affected by atmospheric pressure,
temperature, humidity, ventilation, sunlight, dust, air containing salt, sulfur and other
substances.
c. Take care to protect the equipment against tilting, vibrations and strong impacts, such as
during transportation.
d. Equipment must not be installed in locations where chemicals are stored or gasses are
generated.
(4) Clean and rearrange accessories, cables and cable restraints, etc., in the proper manner.
(5) The instrument must be cleaned beforehand so that there will be no problems with subsequent service.
6. If there are problems, affix on the equipment a label describing the problem and then request repairs.
7. Equipment must not be modified.
8. Maintenance
(1) Make sure to check the equipment and its components for any abnormalities.
(2) If you have not used it for a significant period of time, check the instrument beforehand to assure that
it is in a normal condition and operates safely.
OPERATIONAL PRECAUTIONS FOR USE OF MEDICAL ELECTRICAL
EQUIPMENT
（
SAFETY AND ACCIDENT PREVENTION
）