3) Safety Shutoff/ Motion Cancellation
a.
A
safety plate is provided below
the
base link cover to stop
the
motion of chair
when the plate comes
into contact with an object when the seat is being lowered.
b.
Seat motion can be stopped at any time by depressing foot control, backrest control or chair control
touchpad switches.
4) Headrest Adjustment
a. Height adjustment
Press down or pull up
on
the headrest
bar
for height adjustment.
- 5 -
Take care not to pinch the
fi
ngers when positioning the
CAUTION
Headrest Release
Lever
1. Seat patient upright and all of the way back on the chair.
2. Position the bottom of the headrest cushion so it is even
with the occipital of the patient’s head.
Viewing the lower arch
1. Using the latch release button (white), pivot the headrest
cushion
half way
toward the patient’s head.
2. Have the patient lean back on the headrest.
3. Using the chair controls, place the patient in the desired
operating position.
Viewing the upper arch
1. Lower the backrest and raise the base of the chair.
2. Slide the headrest
in toward backrest
.
3. Support the patients head/headrest cushion while pressing latch release button.
4. Tilt the headrest cushion until the desired upper arch position is obtained.
headrest mechanism.
Always support patient’s head prior to, and during headrest
articulation positioning adjustments. When releasing the latch
release button, make sure headrest cushion locks securely
in place.
CAUTION
b. Headrest Articulation Adjustment