© 2002 Bell'O International, LLC
Bell’O International Corp. will not be responsible for failure to assemble as directed or for the improper assembly, use or handling of this stand.
Bell’O International Corp.
711 Ginesi Drive
Morganville, NJ 07751-1235
Customer Service: (888) 235-7646
E-mail: [email protected]
Web: www.bello.com
SP-224
ASSEMBLY INSTRUCTIONS
Italian Designed • Made in China
8 x
8 x
8 x
4 x
4 x
1 x
4 x
M-1
A. Place the two curved base sections (2 & 3)
on floor against stand center column (1) as
shown in drawing, making certain that holes
are aligned.
B. Insert and fasten the two long screws (4)
into the sides of the stand as shown.
C. Insert and fasten the two short screws (5)
and washers (10) into the rear of the stand
as shown.
D. Insert the spikes (6) or plastic floor levelers
(7), which are supplied in the parts bag, into
the holes located under the stand base.
E. If the floor leveler spikes (6) are used, also
mount the four washers (9), which are
supplied in parts bag, to fasten and lock
the spikes in position.
NOTE: TO AVOID SPEAKER DAMAGE OR
POSSIBLE INJURY, USE THE SUPPLIED
HOOK & LOOP ADHESIVE STRIPS TO
SECURE YOUR SPEAKERS TO THE
SPEAKER STAND.
IMPORTANT: REMOVE THE SPEAKERS
FROM THE STAND PRIOR TO MOVING THE
ASSEMBLED UNIT. WHEN IN USE THESE
STANDS
MUST
BE PLACED ON A FLAT AND
LEVEL SURFACE.
Note: One person can assemble this unit.
9
6
9
10
5
6
2
4
4
8
3
1
Allen Wrench
Plastic Levelers
Threaded Washer
Washer
Leveler Spikes
12mm Short Screw
18mm Long Screw
8
7
9
10
6
5
4
