B-99P
Instruction
Manual
F3 - Rolling Display Time
1.
Press “FUN” key - It will display “F1”.
2.
Press “NEXT” key twice - It will display “F3”
3.
Press “ENT” key - It will display the current rolling display time, which is defaulted to
5 seconds.
4.
Press “SEL” Key to select the digit you want to change
5.
Press “NEXT” to select the number of seconds. This time is how long each call will
display on the screen before rolling to the next call.
6.
“00” means no rolling display
7.
Press “ENT” - The 99P will beep when the setting is successful.
F8 - Display Time / Auto Cancel
1.
Press “FUN” key - It will display “F1”.
2.
Press “NEXT” key three times - It will display “F8”
3.
Press “ENT” key - It will display the current display time, which is defaulted to 20
seconds.
4.
Press “SEL” Key to select the digit you want to change
5.
Press “NEXT” to select the number of seconds. This time is how long each call will
remain on the 99P before being automatically cancelled.
6.
“00” means the call will not be automatically cancelled and needs to be cancelled
manually.
7.
Press “ENT” - The 99P will beep when the setting is successful.
F9 - Restore factory defaults
1.
Press “FUN” key - It will display “F1”.
2.
Press “NEXT” key four times - It will display “F9”
3.
Press “ENT” key - It will display “01”.
4.
Press “SEL” Key and “NEXT” Key to change the number to “00”.
5.
Press “ENT” Key to display “00” to “99” and beep to indicate the B-99P has been
restored to its factory defaults.
For Three Key Call Buttons, the service type indicators are as follows:
Call service type: flickering number / Bill service type: non-flickering number
Model: B-99P
Working Voltage: DC 12V
Working Currency: 450mA
Audio Output Power: 2W
Transmit Frequency: 433MHz
Receiver Sensitivity: 110dB
