Bellman & Symfon Bellman Visit BE1033, Инструкция по эксплуатации

Страница: 17 / 33

Adjustments
You can adjust the volume with the large red volume control on the top of the receiver. The sound
signal on the front can be switched off with the sliding switch located on the back of the receiver.
Trouble shooting
A fault is not always serious. Follow the trouble shooting chart below before calling for service.
Symptom Action
The receiver does not receive signals from the door
or telephone transmitter. Press in the receiver’s test button for a few seconds.
The test lamp should then shine green and the
receiver should emit a sound signal.
If it shines red or not at all the batteries in the
receiver must be changed.
The receiver signals although no one has rung the
door bell or telephone. Change the radio channel fi rst in all Visit transmit-
ters and then in the receiver.
Product description
1) Volume control
2) Indicator lamp
3) Flash signal
4) Bed-shaker output
5) Connection, mains adapter 6) Battery panel
7) Sound signal on/off
8) Test button
CZ
DE
DK
ES
FI
FR
GB
HU
IT
NL
NO
PL
PT
SE
YU
15