Belling IDW604MK2, Инструкция по эксплуатации

Страница: 20 / 30

It is recommend t hat you run a was h cy cle with the
dishwasher empt y an d the n remove the plug from the
sock et, turn off the wa ter supp ly and leave the door of
the appliance slightly open. This will help the d oor
seals to last l onger and prevent odours from forming
within the appliance.
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
One of the factors that cau se odours to form in the
dishwasher is food th at remains tr apped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
After every wash, turn off the water supply to the
appliance and leave the door slightly op en so that
moisture and odours are not tra pped inside.
Before cleaning or performing maintenance, always
remove the plug from the socket.
To cle an the e xterior a nd rubber p arts of the di shw asher,
do not use solvents or abrasive cle ani ng products.
Only use a clo th with warm so apy water.
To remove spots o r stains from the surface of the
interi or, use a cloth da mpened wit h water a n a little
vinegar, o r a cleaning pro duct mad e speci fically for
dishwashers.
After Every Wash
Remove the Plug
No Solvents or Abrasive Cleaning
Moving the Appliance
Seals
When not in Use for a LongTime
Th e installation of the pipes
and electrical equipments
should be done by p rofessionals .
Electrical Shock Hazard
Disconnect electrical power
before
installing dishwasher.
Failure to do so can result in
death or electrical shock.
The installation position of dishwasher sho uld be near the existi ng in let and drain ho ses and
power cord.
One side of the ca binet sink should be chosen to facilitate the connectio n of drain ho ses of
the dishwasher.
Installation preparation
Note: please check the accompanying installation accessor ies(hook for aesthetic panel,screw)
●