8
SECTION 2 - OPERATING INSTRUCTIONS.
2.1 - PRE-START CHECKS.
1.
Ensure that the power unit is standing on a stable level ground or where necessary that it is
suitably chocked for stability.
CAUTION -
DO NOT OPERATE THE POWERPACK AT AN ANGLE GREATER THAN 20
CAUSING EXTENSIVE DAMAGE TO THE ENGINE.
2.
Ensure that the engine exhaust is not obstructed and that there is adequate ventilation to
disperse the exhaust gases.
3.
Ensure that the transmission hoses are positioned to avoid damage by vehicles etc., and that
they will not be under strain when connected to the accessory or tool.
CAUTION -
ENSURE THAT THE INTERCONNECTING HOSE COUPLINGS ARE
DAMAGE TO SEALS.
WARNING -
NEVER ATTEMPT TO ADD FUEL OR OIL WHEN THE ENGINE IS RUNNING.
USE ONLY THE CORRECT GRADE AND DO NOT OVERFILL.
4.
Check engine fuel and oil level, top up as necessary. Refer to engine manual for details of
grades.
5.
Check hydraulic oil level and top up as necessary.
NOTE -
WHEN TOPPING UP THE HYDRAULIC TANK, IT IS ADVISABLE TO USE A
STRAINER. DO NOT OVERFILL.
Содержание Major 30-140
