ASSEMBLY INSTRUCTION
CAUTION:
1. Please read these instructions carefully before assembly. count and organize all parts before you begin.
2. Assemble product on a clean and soft surface, such as a piece of carpet, so as to prevent the surface
paint of parts from scratching off.
ASSEMBLY:
1.
Attach the legs to the table top using M8 headless screws, flat washer M8, spring washer M8 and nut
M8. Do not tighten at this stage.
2.
First attach the long connecting to the table leg using M8 headless, flat washer M8 spring washer (S)
M8 and nut M8, then fix the long connecting rings to the legs together with the short connecting ring.
Do not tighten completely at this stage.
3.
Put the assembled table on a flat surface and then put the knighthead, after that tighten all the screws
and nuts.
4.
Put the bolt cap onto the nut..
5.
Fix the adjustable foot pads under table legs to ensure the table is level.
PARTS&HARDWARE LIST
NO.
DESCRIPTION
QTY
A
TABLE TOP
1
B
LEG
4
C
Connecting
L
2
S
2
D
Adjustable foot pads
4
E
M8 headless screws
12
F
Flat Washer M8
12
G
Spring Washer M8
12
H
Nut M8
12
I
Bolt Cap
12
PLEASE DO NOT OVER TIGHTEN
(Aluminum is soft metal, over tightening may strip thread or break parts)
