Страница 1: ...ient reach of customer 2 Three feet minimum from loudspeaker Note There should be no obstruction between the customer and transmitter or loudspeaker Under no circumstances connect the power cord of the control unit until all work is completed Fasten the power cord with a Tinnerman clamp 5A or 6A and an ES 528772 bracket Attach a tag form E 3013 to the bracket This is the same tag that is used on g...
Страница 2: ...reverbera tion will have a large amount of sound absorbing material such as acoustic ceiling treatment together with carpeting or rugs window or wall draperies and upholstered furniture For _this type of room connect the SP2 loudspeaker lead to terminal 14 of TSI TYPE 2 Moderately Low Reverberation A room with a moderate amount of rever beration will have either carpeting or acoustic treated ceili...
Страница 3: ...controls If trouble still persists replace complete control unit SECTION C70 201 01 4 02 Fluorescent lights transformers motors or other similar apparatus may cause an inductive noise in the loudspeaker Grounding the amplifier chassis may eliminate this noise In cer tain areas local ordinances may not permit grounding Be guided by local instructions The ground wire should be run separately from a ...
