manualshive.com logo in svg

BELL LABS INNOVATIONS Lucent Technologies Access Security Gateway Guard, Руководство пользователя, Страница: 186 / 266

Поделиться
Скачать
BELL LABS INNOVATIONS Lucent Technologies Access Security Gateway Guard Скачать руководство пользователя страница 186

Log Functions

174

13.3.4 Display Error Log – DER Command

Type DER to display the Error Log screen and press the ENTER key.   

NOTE:
Be sure to type a space between the command and the option in the command line.  Use a
comma between options.

Command

Function

DER

The Display Error Log is displayed in chronological order, from
the most oldest record at the beginning to the most recent
record at the end.

DER -

The Display Error Log is displayed in chronological order, from
the most recent record at the beginning to the oldest record at
the end.

DER n

Entering a value n causes only n lines of the Display Error Log
to be displayed, starting with oldest entry.

DER -n

Enter a value for -n and only n lines of the Display Error Log
are displayed, starting with the most recent record.

DER all

Lists the entire Display Error Log, without page breaks, starting
with the oldest record.

DER -all

Lists the entire Display Error Log, without page breaks, starting
with the most recent record.

Site123>DER

--- Display Error Log ---
09/17/98 14:18:23 ** RESTART 00 P2:20094E53 TA
 ?en
09/19/98 22:58:05 ** RESTART 00 P2:20094E53 TA
 ?en
09/21/98 14:26:13 ** RESTART 00 P2:20094E53 TA
 ?en
09/21/98 14:29:33 ** RESTART 00 P2:20094E53 TA
 ?en
09/21/98 14:32:15 ** RESTART 00 P2:20094E53 TA
 ?en
09/21/98 15:35:45 ** RESTART 00 P2:20094E53 TA
 ?en
09/22/98 09:38:49 ** RESTART 00 P2:20094E53 TA
 ?en
09/28/98 12:13:39 ** RESTART 00 P2:20094E53 TA
 ?en
09/28/98 16:02:25 ** RESTART 00 P2:20094E53 TA
 ?en

-- End of List --

Screen 13-5.  Display Error Log Screen

Содержание Lucent Technologies Access Security Gateway Guard











































































































































































































































































Отзывы:

Нет отзывов