Bell and Howell 500 FB Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 81

background image

Error! Reference source not found.

Note to users in the United States of America

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Warnig

Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.

Caution

Properly shielded and grounded cable and connector must be used for
connection to host computer in order to meet FCC Emission limits.

Note to users in Canada

This Class B digital apparatus meets all requirement of the Canadian Interference
Causing Equipment Regulations.

Remarque concernant les utilisateurs au Canada.

Cet appareil mumérique de la Classe B respecte toutes les exigences du Réglement
sur le matériel brouilleur du Canada.

Important

Parts of this manual are subject to change without prior notice.
In no event will the company be liable for direct, indirect, special, incidental, or
consequential damages as a result of handling or operating the machine.

Trademarks

Microsoft, Windows, and MS-DOS are registered trademarks of Microsoft
Corporation.

General Notice:

Other product names used herein are for identification purpose only and may be
trademarks of their respective companies. We disclaim any and all rights in those marks.

Copyright



Copyright, 1997 Ricoh Co., Ltd.

All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission.

«
1
2
3
4
5
...
»

Содержание 500 FB


















































































Отзывы:

Нет отзывов

Похожие инструкции для 500 FB

Бренд: AgfaPhoto Страницы: 2

Бренд: Unitech Страницы: 66

Бренд: Konica Minolta Страницы: 5

MultiScanner i520 OneStep

Бренд: Zircon Страницы: 8

Бренд: Rangevision Страницы: 31

Бренд: Master Страницы: 18

Бренд: Bell and Howell Страницы: 48

Бренд: Leica Geosystems Страницы: 16

Бренд: Xerox Страницы: 2

Бренд: Uniden Страницы: 28

Бренд: Pandigital Страницы: 28

Бренд: Pandigital Страницы: 32

Бренд: Pandigital Страницы: 32

Бренд: Pandigital Страницы: 40

Бренд: Pandigital Страницы: 39

Бренд: Welch Allyn Страницы: 68

Prox'N'Roll SC15132

Бренд: SpringCard Страницы: 8

Бренд: SpringCard Страницы: 50

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды