background image

Belkin Components One-year Limited Warranty
Belkin Components warrants this product against defects in materials

and workmanship for one year.  If a defect is discovered, Belkin will,
at its option, repair or replace the product at no charge provided it is
returned during the warranty period, with transportation charges
prepaid, to the authorized Belkin dealer from whom you purchased the
product.  Proof of purchase may be required.

This warranty does not apply if the product has been damaged by
accident, abuse, misuse, or misapplication; if the product has been
modified without the written permission of Belkin; or if any Belkin

serial number has been removed or defaced.
The warranty and remedies set forth above are exclusive in lieu of all
others, whether oral or written, expressed or implied.  Belkin
specifically disclaims any and all implied warranties, including, without
limitation, warranties of merchantability and fitness for a particular
purpose.
No Belkin dealer, agent, or employee is authorized to make any
modification, extension, or addition to this warranty.
Belkin is not responsible for special, incidental, or consequential
damages resulting from any breach of warranty, or under any legal

theory, including but not limited to lost profits, downtime, goodwill,
damage to or reprogramming, or reproducing any program or data
stored in or used with Belkin products.
Some states do not allow the exclusion or limitation of incidental or
consequential damages or exclusions of implied warranties, so the
above limitations of exclusions may not apply to you.  This warranty
gives you specific legal rights, and you may also have other rights that
vary from state to state.

FCC statement
This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if no
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.  However, there is no
guarantee that interference will not occur in a particular installation.  If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or

more of the following measures:

 

Reorient or relocate the receiving antenna.

 

Increase separation between the equipment and receiver.

 

Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

 

Consult the dealer or an experienced radio technician for help.

CE declaration of conformity
We, Belkin Components, declare under our sole responsibility that the

SmartBeam™ , to which this declaration relates, is in conformity with
generic emissions standard EN50081-1 and with generic immunity
standard EN50082-1 1992.

Introduction

Thank you for purchasing the Belkin Components

SmartBeam™.  Now, communicating with your H/PC, laptop,

palmtop, and Sharp organizer has never been easier!

The Belkin Components SmartBeam™ is a serial-to-infrared

device designed to work with the IrDA 1.0 and Sharp ASK

standards.  Transfer files, network, send email, share drives
and fax modems, even play games between your PC and

H/PC, laptop or palmtop at speeds up to 115.2kbps.  You can

also configure it to communicate with your Sharp organizer,

and backup its valuable data on your PC, all without cables!

Features

 

IrDA 1.0 support for H/PC, laptops and palmtops up to

115.2kbps

 

Sharp ASK support for Sharp Organizers up to 9600bps

 

Also works with HP 5P, 5MP, 6P, 6MP and other IrDA-

equipped printers

 

Jumper-selectable operation for IrDA (default) or Sharp
ASK mode

 

Works with any PC RS-232 serial port capable of

115.2kbps throughput

 

5’-long cable with DB9 connector

 

260 mm (10”) range in fluorescent lighting

 

No power required

Package Contents

SmartBeam™

F5F500

DB25 to DB9 adapter

F2L087

This manual

P72064

Software disk

Registration card

Technical Specs

PC Connector:

DB9 female

Standards supported:

RS-232C (input)

IrDA 1.0 (output)

Sharp ASK (output)

Dimensions

Length:

2.5” (64 mm)

Width:

1.8” (46 mm)

Height: 1.5” 

(38 

mm)

Weight:

4 oz.  (114 g)

Operating Temp:

32 to 104 deg. F (0~40 deg. C)

Storage Temp:

-4 to 140 deg. F (-20~60 deg. C)

Jumper Setting – IrDA Mode or Sharp ASK Mode

The SmartBeam™ is factory set to IrDA Mode.
If you wish to use it with Sharp organizers, it must

be set to ASK mode.

 

Unplug the SmartBeam™ from the serial port.

 

Carefully remove the black plastic label which

covers a hole at the back of the SmartBeam™

 

Insert a small screwdriver, only about ½” inside,

and separate the top part of the case from the

bottom.  Be careful not to touch the circuitry!!!

 

Locate the jumper

and set accordingly.

IrDA mode is setting

the jumper toward
the cable; ASK is

setting the jumper

away from the cable

 

Snap the cover back onto the base with the circuit board

holes on the posts, and the white cable tie inside the case.

The cable tie must be inside the case so as to provide

strain relief.

 

Replace the black plastic label and cover the rear hole.

 

Re-attach the SmartBeam™ to the serial port.

Note:

Do not change the jumper setting while attached.

Installation

POWER OFF THE COMPUTER AND ALL ATTACHED DEVICES AND
PERIPHERALS.

Locate a free serial port to be used with the SmartBeam™.  It is

usually labeled as a COM port.  This can either be a DB9 male or

DB25 male.  If it is a DB25, the included adapter must be used to

that the SmartBeam™ cable can be attached properly.  Once

attached, tighten the thumbscrews until snug.  Do not over-

tighten.  Take note of this COM port.

DB9 serial port

DB25 serial port

DB25 to DB9

Adapter

SmartBeam™

cable

IrDA

Sharp

ASK

SmartBeam™

User Manual

Corporate Headquarters

Atlanta Branch Office

501 West Walnut Street

6350 Regency Parkway

Compton, CA 90220

Suite 525

310-898-1100 voice

Norcross, GA 30071

310-898-1111 fax

(770) 825-0511 voice
(770) 825-0679 fax

Belkin Components, Ltd.
Clarke Road, Mount Farm
Bletchley, Milton Keynes
MK1 1LG
+44 (1908) 367 178 voice
+44 (1908) 366 564 fax

Отзывы: