RK2000 & RK2001 Instructions
Page 1
P35727
RK2000 Product Inventory
RK2001 Product Inventory
Vertical Upright Channel 84" (2)
Vertical Upright Channel 48" (2)
Base Angle (2)
Base Angle (2)
Top Angle (2)
Top Angle (2)
1/2" - 13 x 1 Hex Bolt (12)
1/2" - 13 x 1 Hex Bolt (12)
1/2" Lock Washer (12)
1/2" Lock Washer (12)
12-24 x 1/2" lg. Screws (50)
12-24 x 1/2" lg. Screws (50)
Tools Required
3/4" Socket or Wrench
Level or Carpenter Square
RK2000 and RK2001 INSTRUCTIONS
Instructions
1.
Install top angles to vertical upright channels.
a. Lay vertical upright channels on edge
so tapped holes face you and the
floor. Be sure open sides of upright
channels face each other.
b. Align holes in top angle with
corresponding holes in vertical
uprights. Formed leg of top
angle should be facing toward you.
c. Install hex head bolts and lock
washers. Finger tighten only.
d. Turn vertical upright over (rotate 180
degrees) and repeat steps (a)
through (c).
Finger tighten only.
Top Angle
Hex Bolt and
Lock Washer
